INFO
Standalone device for access control and door opening using contactless cards, key fobs or PIN code.
When you enter the PIN code or touch the registered RFID chip or press an impulse is triggered that opens the electronic lock and allows you to enter the facility.
The SDC-8TEW version with a 125 kHz reader is also equipped with a special module that enables the device to be connected to the Tuya mobile application, which combines the management of many devices from different manufacturers and connects them to the smart home infrastructure.
When you connect this device to your WiFi network, you can add PIN codes with limited validity even remotely, and this is an indispensable functionality if you rent out your apartment.
Internet connection and the use of the mobile application are not mandatory, as you can manage and use the device in offline mode.
In this case, you enter users with the help of administrator cards, and all settings can be set with the help of keys.
The SDC-8TEW devices have a high-quality metal housing, are waterproof (IP86) and, with their elegant appearance, are suitable even for the most prestigious facilities.
The touch screen with illuminated keys will allow you to easily enter the PIN code even at night.
The SDC-8TEW works with RFID chips EM4200, TK4100 and programmed chips T5577, which operate at a frequency of 125 kHz. You can register up to 2000 users and users can also be transferred to a new device.
The device can be set to work as a reader, according to the Wiegand 26 protocol, and thus you can use the same device for entry and exit or to open several doors.
Technical Specifications
Model: SDC-8TEW
Dimension: 86x86x20 mm
Power supply: 12-24 V
Frequency: 125 kHz
Supported chips: TK4100, EM4200, programmed T5577
Reading Range 3-6 cm
Housing: Metal, waterproof, IP68
Max number of users: 2000
Pulse time on relay: 0-99 seconds
Max load relay: 3A
Indicators: LED, beeper
Operating temperature: -40°C to 60°C
Humidity: 10% to 90%
Reading range of the reader: 2-5 cm
Expansion: the possibility of connecting an additional Wiegand reader (or Wiegand output)
Net weight: 300 g
Gross weight: 400 g
If you need larger quantities send an email to info@rfidspecialist.eu or call +386 41 884 124 and we will be happy to help you.
If you are an integrator or reseller, we offer special discounts.